Horizon Fitness SmartStacker User Manual page 251

Code
No error codes
(Amplifier display: N/A)
3350
An unexpected error occurs on the servo
amplifier.
(An error which does not correspond to any of the
errors 3301 through 3349 has occurred.)
A211 Inverter for Vacuum Blower Motor: 3400-3499
Inverter no response
(Inverter display: N/A)
The communication connection between the
3400
inverter, the short circuit board P109111 (QPW-
936), the reinforced insulation communication
board P110413 (QPW-943), and the control
board P109512 (QPM-290) for the 2nd regist unit
has not been established.
Inverter communication error
(Inverter display: N/A)
3401
The control board P109512 (QPM-290) for the
2nd regist unit received NAK several times from
the inverter.
Inverter alarm
Overcurrent during acceleration
(Inverter display: E.OC1)
3410
During acceleration, the output current of the
inverter became double the rated current.
Inverter alarm
Overcurrent during constant speed
(Inverter display: E.OC2)
3411
During constant-speed operation, the output
current of the inverter became double the rated
current.
Inverter alarm
Overcurrent during acceleration
(Inverter display: E.OC1)
3412
During deceleration, the output current of the
inverter became double the rated current.
Inverter alarm
Overvoltage during acceleration
(Inverter display: E.OV1)
3420
During acceleration, regenerative energy has
caused the main circuit DC voltage in the inverter
to exceed the specified value.
SmartStacker User's Manual
Description and Causes
If an Error Code Is Displayed on SmartStacker
If this error occurs frequently, call your local
dealer.
Close all the covers and make sure the
Emergency Stop button is released.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
Solutions
251