Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-25
Setting - Banner Screen Part 2
1
2
1
An error occurs if the barcode cannot be
received
Normally, an error occurs if the banner sheet is used
but the barcode cannot be received correctly. (The
barcode is not printed on the sheet or the barcode size
or the printed position is out of specifications.)
If you remove check-marks, an error will not occur
even if the barcode on the front, middle or back banner
cannot be scanned.
2
Ignore the barcode except
for the banner
When the banner sheet is used,
the error is normally displayed if the
barcode of other job is detected during
the execution of the job.
If the barcode which is not for the
banner is printed and it is misdetected,
put a check-mark here.
104
Back Banner
• Print the barcode on the last sheet of the job.
• This is used to identify the job if the machine is
Middle Banner
• The middle banner is printed in
the middle of the job.
For example,
• It is printed on every indicated
sheet number.
• A cover page including the bar-
code which is used in the post-
process will be placed on the top
.
of the stack
used in a near line system.
Front Banner
• Print the barcode on the first sheet
of the job.
• This is used to recognize the sheet
as the end of the job if the machine
is used in a near line system.
• A cover page including the bar-
code which is used in the post-
process will be placed on the top
.
of the stack
SmartStacker User's Manual
Advertisement
Table of Contents
