SmartStacker
7-1-6
Checking the Rollers
If trims do not fall smoothly but they wrap around the rollers, the rollers may be worn out and cause that
the sheets and trims are skewed when they are transported.
Check for any chips of rollers (gray powder) once a week.
1st Process Unit
2nd Process Unit
386
• See page 383 and draw out
the cutter unit. Check for chips
fallen on the frame.
• If you find many chips, rollers
should be replaced. Contact a
service technician.
• See page 383 and draw out
the cutter unit. Check for chips
fallen on the frame.
• If you find many chips, rollers
should be replaced. Contact a
service technician.
Roller
Frame
26030
60106A1
Roller
Frame
26030
60106A1
SmartStacker User's Manual