Table of Contents
Advertisement
Error Recovery - When using the B2 Stacker
2-7-2
Resuming the Job
1
Remove any jammed sheets.
See page 364 for removing the jammed sheets.
2
Press
on the Error screen.
➡ When you are using the machine in the offline mode, go to Steps 3 and 4 if you have already set
the number of sheets for one block using the Run - Main screen. In any other cases, go to Step 5.
3
Check the Warning screen and remove the sheets.
Lower the feed table and the pallet, and remove the sheets by reference to the number of sheet which is indicated
on the Warning screen.
Sheet Feeder Control Panel
B2 Stacker Control Panel
4
Press
• The counter on the Run - Main screen will be calculated by the number of removed sheets.
5
Resume the operation by pressing the Motor/Feed Start button.
144
on the Warning screen.
Reference to the number of sheets
to be removed from Sheet Feeder
Warning Screen
Additional Information
The number indicated on the panel may be
different from the actual number you have
to remove depending on the type of jam.
Important
See pages 131 through 136 for reprint-
ing the sheets.
SmartStacker User's Manual
Reference to the number of
sheets to be removed from
B2 Stacker
Advertisement
Table of Contents
