Table of Contents
Advertisement
Code
Sheet has not arrived at slope section sheet pass
sensor
510
The B512 was not turned on within the specified
time.
Sheet remains at slope section sheet pass
sensor
511
The B512 has remained on for longer than the
specified time.
Too many sheets between register section exit
sheet pass rear sensor and slope section sheet
pass sensor
512
The number of sheets between B594 and B512
exceeded the specified number.
Too many sheets passed slope section sheet
pass sensor
513
B512 detected the sheet that had not pass B594.
Sheet has not arrived at transport speed
reduction timing sensor
520
The B510 was not turned on within the specified
time.
Sheet remains at transport speed reduction
timing sensor
521
The B510 has remained on for longer than the
specified time.
Too many sheets between slope section sheet
pass sensor
and transport speed reduction timing sensor
522
The number of sheets between B512 and B510
exceeded the specified number.
Too many sheets passed slope section sheet
pass sensor
523
B510 detected the sheet that had not pass B512.
Sheet has not arrived at stack section entrance
sheet pass rear sensor
530
The B520 was not turned on within the specified
time.
SmartStacker User's Manual
Description and Causes
If an Error Code Is Displayed on SmartStacker
Remove the sheet which is jammed.
Remove the sheet which is jammed. If this error
code appeared even though the sheet is not
jammed, check the B512 sensor is not dirty. (See
page 374 for the cleaning instruction.)
Remove the sheets which are jammed. Also,
check the B594 sensor is not dirty. (See page
372 for the cleaning instruction.)
Remove the sheets which are jammed. Also,
check the B512 is not dirty. (See page 374 for
the cleaning instruction.)
Remove the sheet which is jammed.
Remove the sheet which is jammed. If this error
code appeared even though the sheet is not
jammed, check the B510 sensor is not dirty. (See
page 374 for the cleaning instruction.)
Remove the sheets which are jammed. Also,
check the B512 sensor is not dirty. (See page
374 for the cleaning instruction.)
Remove the sheets which are jammed. Also,
check the B510 is not dirty. (See page 374 for
the cleaning instruction.)
Remove the sheet which is jammed.
Solutions
225
Advertisement
Table of Contents
