Table of Contents
Advertisement
Reprint - When using the Merge Stacker
4
Select "All Reprint" and click "Print."
➡ The reprint list is printed by the desktop printer
that has been selected by the FLC (Finishing
Line Controller).
➡ The job moves from the list of Pending jobs to
the list of Held jobs.
➡ When all the sheets have been reprinted by the
press, the job is moved back to the list of Pend-
ing jobs again.
5
Set the reprinted sheets on the Sheet Feeder.
6
Select the job for the reprinted sheets and run it.
132
Attention
• Clicking print in this process is to print
reprint list only.
• Actual job sheet must be reprinted on up-
stream Press. Follow the instructions of
the press.
Attention
If you use the All Reprint function for a job,
that job will move to the list of Held jobs. At
that point the SmartStacker will not be able
to process the remaining part of the job.
Once the job is reprinted, the SmartStacker
will be able to process the whole job.
Reprint Sheets Report
Job ID:
2x2 700x500x140 8s
Job Name:
2x2 700x500x140 8s
Submitted Day:
2014/06/17 13:29
Plan
Success
3
1
Stack:
Block:
6
2
Sheets:
8
3
Reprint Sheets
8 7 6 5 4 3 2 1
Sheets to be reprinted
(Sheet number for DFE)
Memo
Sheet Jam, 2Pro
Memo entered by FLC
SmartStacker User's Manual
2014/06/17 13:30:26
Planned Job
The sheets that have
been delivered to the
completed conveyor
before the error occurred.
Advertisement
Table of Contents
