Setting - General(1) Screen - Part 4 - Horizon Fitness SmartStacker User Manual

Finishing Line Controller Screen Descriptions
1-3-19

Setting - General(1) Screen - Part 4

1
2
1
Template URL
When using the FLC in cooperation with the
SmartConnect for SmartSracker (customized
order), check the box and enter the standby URL
on the SmartConnect side. By reading the barcode
printed on the sheet and transmitting the read
information to the SmartConnect, a JDF for one
block can be acquired from the SmartConnect just
before executing the job.
2
Number of Sheets Digits / Sheet
Number Digits
Set the number of digits to be read as the number of
sheets or sheet number.
Example:
BBBCCCDDD
Job ID Number of sheets Sheet Number
Digits to Start
Number of
Reading the Num-
Digits to
ber of Sheets
Read
98
Number of
Digits to be
Read
Digits to Start Reading
the Sheet Number
3
Sheet Order:
Set whether to count the sheet order in ascending
order or descending order.
SmartStacker User's Manual
3