Table of Contents
Advertisement
SmartStacker Screen Descriptions
1-2-7
Run - Setting Screen - Part 1
1
2
3
1
Feed Speed
This sets the number of uncut sheets to be
processed per hour.
2
Feed Rotor Suction Length
This sets the suction length of the feed rotor. If the
machine misfeeds, make the length longer. If the
machine double-feeds, make the length shorter.
34
3
Amount of Downward Vacuum of the
Transport Roller Section
This sets the amount of vacuum provided by the fans below the
transport rollers in the Merge Conveyor.
Increase the vacuum air if the sheets do not align with the angle
adjusting guide and result in misaligned stack of sheets.
Adjust the air if the sheets do not run on the transport rollers
smoothly and result in an error, the error code 340 / 350; Sheet
has not arrived at upper / lower transport section sheet pass
sensor, or the error code 341 / 351; Sheet remains at upper /
lower transport section sheet pass sensor.
(Reduce the air for light sheets such as normal paper.
Increase the air for heavy sheets such as coated paper.)
Angle Adjusting Guide
SmartStacker User's Manual
Fans
Advertisement
Table of Contents
