Table of Contents
Advertisement
1-2-12
Run - Fine Adjustment Screen - Part 2
The sheet feeder is optional.
1
2
1
Merge Stacker Stopper Position
The stopper position can be adjusted here. The
head of the stack is held by this stopper while the
pages are stacked.
2
Merge Stacker Sheet Holding Plates
Pressure
The sheet holding plates prevent the sheets from
bouncing back from the stopper.
This pressure is automatically adjusted according to
the thickness of sheet. (The pressure is reduced for
thin sheets, and increased for thick sheets.) If you
want to change the pressure, make the adjustment
here.
If a sheet does not reach the stopper and causes a
jam, decrease the pressure.
If the front and rear edges of the stack are not
aligned correctly, increase the pressure.
SmartStacker User's Manual
SmartStacker Screen Descriptions
Option
39
Advertisement
Table of Contents
