Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-23
Setting - Line Screen
1
1
Supported machines
The images and names of the machines which
can be included in the finishing line of the FLC
are shown here. Select the finishing line which is
actually connected to the FLC from the left area and
move it to the right area.
2
Add Button
Select the finishing line to use from the left area.
Click this button to add the selected one to the right
area.
3
Delete Button
Select the finishing line to delete from the right area.
Click this button to delete the selected one from the
right area.
102
2 3
4
4
Finishing Line
The names and the IP addresses of the machines
which are included in the finishing line are indicated
here.
Place the machine which is nearest to the press at
the top of the list. Place the other machines in the
order of the sheet flow.
5
Order Buttons
Use these buttons to change the order of the
machines in the list.
6
Device Editing
When you include a new machine in the finishing
line, enter the necessary information or settings:
Device ID
IP address
Port number
Model number
Informal name
5
6
SmartStacker User's Manual
Advertisement
Table of Contents
