Table of Contents
Advertisement
1-3-4
Run - Main Screen - Part 4
3
4
1
Indicator for Connection with HP DFE
If the machine is used in a near line system, the
name of the connected UBM (reside inside HP DFE)
is displayed here.
2
Line Condition Indicator
The status of the finishing line is displayed using
icons. If you are using the machine in an inline
system, this information is sent to the press.
Error:
Not Ready:
(Gray)
Changeover: One of the machines in the line
Warning:
Running:
Ready:
(Green)
SmartStacker User's Manual
5
One of the machines in the line
has an error.
One of the machines in the
line is not ready to run. The job
cannot be run.
is still doing a changeover.
The machines are ready or
running a job, but one of the
machines has a warning.
The machines are running a
job.
The machines are ready to
receive a job.
Finishing Line Controller Screen Descriptions
3
Pending jobs
If the machine is used in a near line system, the job
list sent from the DFE to the FLC is displayed here.
The job that is being run is also displayed here.
If a job has not been run for seven days, it is
displayed in red. This period can be changed on the
FLC Setting screen. See page 99 for details.
4
Held jobs
This displays the list of jobs being held and the jobs
to be reprinted.
If a jam occurs during a job, after the jammed sheet is
removed and that job is resumed, that job is displayed in
this list after the last sheet of the job has been stacked.
Jobs can be also moved to the held jobs by the user.
If a job has been left on this list for seven days, it is
displayed in red. This period can be changed on the
FLC Setting screen. See page 99 for details.
5
Completed jobs
This displays a list of completed or aborted jobs.
If a job has been left in this list for seven days, it will
be deleted. This period can be changed on the FLC
Setting screen. See page 99 for details.
1
2
83
Advertisement
Table of Contents
