Setting the Control Panel - When using the B2 Stacker
If you have selected
2
Decide how many blocks to stack in the B2 Stacker before they are delivered.
Delivering after the stack reaches the upper limit
• Stack function is off
Delivering after the number of blocks reaches the preset counter
• Stack function is on
Enter the number
of blocks
3
Set the number of pages included in each block.
Enter the number of sheets
for one block.
4
Decide whether the blocks should be offset during stacking.
Straight Stacking
160
, set the following:
Number of blocks
already stacked
4
0
4
Number of pages
already stacked
The entered value is displayed here.
0
5
Press this button to
clear the number of
blocks already deliv-
ered.
The entered value is displayed here.
Press this button to clear the number of
pages which have already been stacked.
Offset Stacking
SmartStacker User's Manual