Adjusting Individual Trim Positions - Horizon Fitness SmartStacker User Manual

5-2-4

Adjusting Individual Trim Positions

If the one of bleed or gutter trim positions is incorrect, you can move the individual cutter.
Run - Page Size Fine Adjustment Screen
Example: Changing two of the cutting
positions in the First Process Unit.
3-R
3-F
Example: Changing two of the cutting
positions in the Second Process Unit.
1-R 3-MF
SmartStacker User's Manual
Run - Cutter Position Fine Adjustment - First Process Unit
Fine Adjustment Screen
Feed Direction
Adjust the cutter position
as needed.
Run - Cutter Position Fine Adjustment - Second Process
Unit Fine Adjustment Screen
Feed
Direction
Adjusting the Cutting Positions
Check this screen to find which
cutter needs to be adjusted.
193