Table of Contents
Advertisement
2-3
Loading the Sheets on the Sheet Feeder
2-3-1
Loading the Sheets on the Feed Table
1
Raise the suction head.
Lift the handle up.
2
Place a pallet loaded with sheets on the feed table.
Loading the Sheets on the Pallet
Within 5 mm /
0.19" from the
edge of pallet
Important
If the FLC is not set up to feed a banner
sheet, manually remove any banner sheet
that is on the top of the sheets loaded on
the pallet. (This is necessary if you have not
checked "Feed a banner sheet" on the Set-
ting - Banner screen. See page 103.)
118
Hook it on the stopper.
23073
10301A3
Feed Direction
26030
20201B1
Center of pallet
Maximum height of 920
mm / 36.2" (including the
pallet 120 mm / 4.72").
If the height of the pallet is
120 mm / 4.72" or lower,
place an appropriate object
underneath the pallet to
raise it up.
(If the height of the pallet
itself is too low, the bottom
sheets may not be fed.)
SmartStacker User's Manual
23073
10301A4
Advertisement
Table of Contents
