If A Warning Screen Is Displayed On Smartstacker - Horizon Fitness SmartStacker User Manual

Sheet cutter
Table of Contents

Advertisement

6-3

If a Warning Screen is Displayed on SmartStacker

If you try to start the machine before a changeover is complete, the Warning screen will be displayed. See
the table below and follow the instructions. To clear the Warning screen, press the OK button.
Warning Code
Warning
Code
10
11
20
21
22
23
SmartStacker User's Manual
Return Button
Warning Screen
Message
OK Button
Causes and Solutions
The communication between TCP and IP is not
established.
See the settings on the Information – Administrator
– Network Configuration screen. (See page 77 for
details.)
The communication between TCP and IP is not
established.
The designated port number is already used.
See the settings on the Information – Administrator
– Network Configuration screen. (See page 77 for
details.)
The waste bin is almost full in the 1st Process Unit.
Press the OK button and remove the waste. (See page
363 for details). If you press the Return button, this
message icon will be displayed again the next time the
Power switch is turned on.
The trim bin is almost full in the 1st Process Unit.
Press the OK button and remove the trim. If you press
the Return button, this message icon will be displayed
again the next time the Power switch is turned on.
The waste bin is almost full in the 2nd Process Unit.
Press the OK button and remove the waste. (See page
363 for details). If you press the Return button, this
message icon will be displayed again the next time the
Power switch is turned on.
The trim bin is almost full in the 2nd Process Unit.
Press the OK button and remove the trim. If you press
the Return button, this message icon will be displayed
again the next time the Power switch is turned on.
345

Advertisement

Table of Contents
loading

Table of Contents