Table of Contents
Advertisement
Code
Merge conveyor control board
EEPROM loading error
9311
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
Merge conveyor control board
EEPROM saving error
9312
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
Merge conveyor communication error
9320
The ARCNET communication error occurs in
Merge Conveyor control board.
Merge conveyor PRO24V trip detection
9330
There is a short circuit in the wiring of sensors
and switches.
Merge conveyor control board WDT
9340
The CPU on the board has become "lost" in a
program loop.
Speed parameter error
9350
There is a problem with the speed parameter
setting.
Offset queue error
9390
Offset queue more than the specification
Merge stacker control board
EEPROM connection error
There is a problem with the wiring/connection
9410
between the QPM-290 control board and the
QPW-795 EEPROM board.
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
Merge stacker control board
EEPROM loading error
9411
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
SmartStacker User's Manual
Description and Causes
If an Error Code Is Displayed on SmartStacker
If this error occurs frequently, call your local
dealer.
Turn off the power. Wait about 30 seconds and
turn on the power again. If this error occurs
frequently, call your local dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
Solutions
341
Advertisement
Table of Contents
