Table of Contents
Advertisement
1-2-16
Run - Cutter Position Fine Adjustment - 1st Process Unit Fine Adjustment Screen
1
2
5
1
Simultaneous Adjustment Button
Separately Adjustment:
The cutters are adjusted individually.
Simultaneous Adjustment:
When one of cutters is adjusted, all the
cutters in front than the adjusted cutter
are automatically adjusted along with the
adjusted cutter.
2
Cutter Position Fine Adjustment
If the one of bleed or gutter trim positions is shifted
up or down, adjust the position of the affected cutter.
Cutters which are not used for the selected job
cannot be adjusted.
SmartStacker User's Manual
Feed
Direction
SmartStacker Screen Descriptions
3
Cutter Position Indication
This indicates which cutter positions are adjustable,
depending on the selected job.
4
Go to the 2nd Process Unit Fine
Adjustment Screen
5
Return to the Run - Page Size Fine
Adjustment Screen
3
4
43
Advertisement
Table of Contents
