Table of Contents
Advertisement
1-3-12
Run - Main Screen - Part 12
1
Stop Button
When the Stop button is clicked, the selected job is
stopped. Click this button to stop feeding. Any sheets
already inside the machines will continued to be
processed (when `Immediately` is selected for the
Stop Timing). Click the Start button to resume the job.
Attention
• The job and machine can be paused by pressing
the Stop button on the machine. To stop the ma-
chine and the job, press the Stop button again.
• Once a job has been stopped, other jobs can be
run instead. However, the other jobs cannot be
run while the machine has been paused.
• When the machine is used in a Near Line
system, the timing to stop the machine can be
changed. See page 81 for details.
2
Line Clear Button
If an error occurs, press this button to send any
sheets which are in-process to the uncompleted
conveyor. If a jam occurs in the SmartStacker,
the job is resumed after the jammed sheets
are removed. In this case, the remained sheets
will be delivered to the uncompleted conveyor
automatically. In this case you do not need to use
this button.
SmartStacker User's Manual
Finishing Line Controller Screen Descriptions
However in case of jam in the Merge Stacker, the
remaining sheets are not delivered. Therefore click the
line clear button to deliver it.
If you click Line Clear button in a state in which stacks
are left in the Merge Stacker, the confirmation message
is displayed. Press the Line Clear button again after
pressing the OK button, and the remaining stacks will
be delivered to the uncompleted conveyor.
3
Setting Button
Click this button to display the FLC Setting screen. The
Numeric Keypad screen will be displayed. Enter the
administrator password. See page 95 for details.
4
Diagnostic Tool Start Button
See page 94 for details.
5
Exit Button
Click this button to close the Run - Main screen and exit
from the FLC control screen.
1
2
3
4
5
91
Advertisement
Table of Contents
