Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-21
Setting - General(2) Screen - Part 2
1
2
3
1
When a child job is removed, the parent job
is automatically moved to another tab
If the FLC receives the job of the same sheet ID
more than one because of reprint (or repeat), the
job that is originally stored becomes the parent job,
and the job that is received next becomes the child
job. The set of these are moved to the Pending jobs
tab.
If this box is not checked, the parent job remains in
the Pending jobs tab when the child job is deleted.
If this box is checked, the parent job is automatically
moved to another tab.
2
Support unique sheet ID
Normally, uncheck (off) this box. Check this when a
banner sheet is applied with a unique sheet ID that
differs to that of the previous or the next sheet.
100
3
The banner sheet is processed in order
described in the JDF
This function is available only when the machine is
used in a near line system.
When this one is selected, the banner sheet is
processed in order described in the JDF.
When this one is not selected, the banner sheet is
processed in reverse order of banner sheet.
<When the box is not checked>
Back Banner
• Print the barcode on the last sheet of the job.
• This is used to identify the job if the machine is used
in a near line system.
Front Banner
• Print the barcode on the first sheet of the job.
• This is used to recognize the sheet as the end of the
job if the machine is used in a near line system.
• A cover page including the barcode which is used in the
post-process will be placed on the top of the stack.
SmartStacker User's Manual
Advertisement
Table of Contents
