Table of Contents
Advertisement
No
3100
A job was aborted by the machine.
Exception error.
4000
Reboot the FLC.
The job loaded is not correct.
5020
The barcode on the banner sheet does not
match when starting the job
The job loaded is not correct.
A barcode for another job was received when
5030
starting a job although the barcode is not
required.
No banner sheet
The barcode on the back banner could not be
5040
received within a certain period of time when
starting a job.
No banner sheet
The barcode on the front banner could not be
5041
received within a certain period of time when
starting a job.
No banner sheet
The barcode on the middle banner could not
5042
be received within a certain period of time
when starting a job.
No executable job
5050
The executable job corresponding to the
received barcode does not exist.
No executable job
The job was tried to be started from the
5060
machine, but the executable job does not
exist.
Failed to start the job.
5070
The previous session has not been
completed.
No executable job
The next job was tried to be started, but the
5080
executable job corresponding to the received
barcode does not exist.
The job loaded is not correct.
5090
The barcode on the banner sheet does not
match when restarting the job after pausing.
SmartStacker User's Manual
Descriptions
If an Error Code Is Displayed on FLC
System
Line
Near Line
Execute the job again.
If this error occurs frequently, call your local
Both
dealer.
Near Line
Load the correct job on the Sheet Feeder.
Near Line
Load the correct job on the Sheet Feeder.
Check that the barcode is printed on the sheet.
Near Line
If the barcode is printed, adjust the position of
the barcode reader of the Sheet Feeder.
Check that the barcode is printed on the sheet.
Near Line
If the barcode is printed, adjust the position of
the barcode reader of the Sheet Feeder.
Check that the barcode is printed on the sheet.
Near Line
If the barcode is printed, adjust the position of
the barcode reader of the Sheet Feeder.
Check that the job is in the list of Pending jobs.
If the job is in the list of Held job, move the job
Near Line
to the list of Pending jobs. If the job does not
exist in any list although you have not deleted
the job, call your local dealer.
Check that the job is in the list of Pending jobs.
If the job is in the list of Held job, move the job
Near Line
to the list of Pending jobs. If the job does not
exist in any list although you have not deleted
the job, call your local dealer.
If this error occurs frequently, call your local
Near Line
dealer.
Check that the job is in the list of Pending jobs.
If the job is in the list of Held job, move the job
Near Line
to the list of Pending jobs. If the job does not
exist in any list although you have not deleted
the job, call your local dealer.
Near Line
Load the correct job on the Sheet Feeder.
Solutions
351
Advertisement
Table of Contents
