Table of Contents
Advertisement
Changeover
2-2-3
Setting the Trim Guides for the Gutter Trim
If you turn the gutter trim function on or off, the Trim Guides Setting screen will be displayed when you
do the changeover.
Set the trim
guides in the
positions
colored in red.
Important
Insert and push each trim guide down until
it stops. If a guide is not inserted complete-
ly, the guide will not be able to direct the
trim, and this can cause a jam.
Additional Information
The trim guide for 3-MF cutter should be
installed only when the sheet is divided into
six sheets at the first process unit.
116
If this icon is displayed,
install the trim guides.
If this icon is displayed,
remove the trim guides.
Press
after setting
the trim guide.
Tighten the two
locking screws.
Press the changeover icon.
The machine resumes the
changeover.
SmartStacker User's Manual
Advertisement
Table of Contents
