Table of Contents
Advertisement
SmartStacker Screen Descriptions
1-2-23
Trim Guide Setting Screen
If you turn the gutter trim function On or Off, the Trim Guide Setting screen will be displayed when you
do the changeover. It's also possible to display this screen from the Run screen.
1
4
1
Trim Guide Setting Positions
Set the trim guides in the positions shown in red.
2
Installing Trim Guide
This drawing is displayed when the gutter trim function
is changed from Off to On. Loosen the locking screws
and install the trim guide as shown in the drawing.
Important
If a trim guide should be installed, but is not,
the trim will not be removed. This can cause
a jam.
50
32
3
Removing Trim Guide
This drawing is displayed when the gutter trim function
is changed from On to Off. Loosen the locking screws
and remove the trim guide as shown in the drawing.
Important
If a trim guide should be removed, but is
not, the guide scratches and breaks the
moving sheets. This can cause a jam.
4
Return to the Setting - Size Setting
Screen
If this screen is displayed from the Run screen, you
will return to the Run screen when you press this
button.
5
OK Button
Press this button after completing the settings for the
trim guides. The changeover will continue.
SmartStacker User's Manual
2
3
5
Advertisement
Table of Contents
