5-3-7
Adjusting the Pressure of the Sheet Hold-Down Plates in the B2 Stacker
The sheet hold-down plates prevent a sheet from bouncing back from the stopper. The holding pressure
of sheet hold-down plates is automatically adjusted to match the thickness of sheet. The thicker the
sheet, the higher the pressure. You can use a setting which is different from the automatic setting.
Run - Fine Adjustment Screen
Sheet Stacked in
the B2 Stacker
SmartStacker User's Manual
OK
NG
Adjusting the Guide Positions
Sheet Hold-Down Plates
If the sheet stops before it reaches the
stopper, decrease the pressure.
If the stacked sheets are misaligned side-
to-side, increase the pressure.
203