Table of Contents
Advertisement
Adjusting the Sheet Feeder
4
Start the vacuum pump.
• Select the Sheet Feeder tab in the Information - Single Operation screen, and turn on the
vacuum pump.
Information - Main Screen
➡ The vacuum pump will start, and the vacuum piston will grip the top sheet and lift it.
5
Adjust the suction.
Pressure Gauge
Adjust so that the pressure gauge is set
between +0.055 and 0.06 MPa (-5.0 psi).
182
Information - Single Operation Screen
Blower Air
Feed Rotor
Separation Air
Suction Head
Front / Side Air
Adjust so that the vacuum gauge is set
to -0.035 MPa (8.0 to 8.7 psi).
Vacuum Gauge
23073
10401A6
SmartStacker User's Manual
Advertisement
Table of Contents
