Information - Single Operation Screen - Part 1 - Horizon Fitness SmartStacker User Manual

SmartStacker Screen Descriptions
1-2-35

Information - Single Operation Screen - Part 1

1
2
3
1
Unit Selection
Press the correct button to go to the Single
Operation screen for the selected unit.
2
Single Operation Buttons
Each section of the machine can be operated
separately using these buttons.
Here are the symbols used on the single operation
buttons:
The machine stops.
The belts, rollers and other
mechanisms turn in the normal
direction.
The belts, rollers and other
mechanisms turn in the reverse
direction.
The guides, cutters and other
mechanisms return to the home
positions.
The guides, cutters and other
mechanisms return to the set
positions.
62
The rollers turn slowly in the normal
direction.
The table moves to the upper limit.
The table moves to the lower limit.
The table lowers.
The blowers and solenoids are turned
on.
The blowers and solenoids are turned
off.
Attention
On a mechanism which has a Home Posi-
tioning button, if another button is pressed
when the mechanism is not at the home po-
sition, the mechanism will not move. Return
the mechanism to the home position first.
3
Go to the Information - Main screen
SmartStacker User's Manual