Table of Contents
Advertisement
SmartStacker Screen Descriptions
1-2-19
Setting - Size Setting Screen - Only for Offline System- Part 1
8
7
6
5
4
3
1
Sheet Width
Enter the width of the sheet.
Allowable range for the sheet width:
279.4 to 762 mm / 11" to 30"
2
Division Number - Long Side
Enter the number of parts into which you want to
divide the long side of the sheet.
Allowable range for the division number - long side:
1 through 7
3
Sheet Length
Enter the length of the sheet.
Allowable range for the sheet length:
330 to 530 mm / 12.99" to 20.87"
4
Division Number - Short Side
Enter the number of parts into which you want to
divide the short side of the sheet.
Allowable range for the division number - short side:
1 through 4
46
5
Gutter Trim On/Off - Long Side
This is used to set whether to trim the gutter of the long side.
On: The gutter is trimmed
Off: No gutter trim
If you change this setting, the Trim Guides
Setting screen will be displayed when you do the
changeover. See page 50 for details.
6
Gutter Trim Width - Long Side
If you have turned on the gutter trim function, this is
used to set the gutter trim width.
Allowable range for the gutter trim width:
6 to 15 mm / 0.24" to 0.6".
7
Page Width
Enter the page width.
8
Page Length
Enter the page length.
SmartStacker User's Manual
1
2
Advertisement
Table of Contents
