Table of Contents
Advertisement
2-6
Reprint - When using the Merge Stacker
2-6-1
Selecting the Reprint List Preparation Method
Basically, there are four ways to prepare reprint list. This allows you to decide which part of the
processed sheets to use or to dispose of, and which part of the job to actually reprint.
1. Reprinting the whole job from the beginning
All the sheets included in the job will be reprinted.
5
4
3
2
1
Stack 1
2. Reprinting only the bad stack
For example, when running a job with five blocks in a stack, there is a jam in the third block of Stack
2, all the sheets for Stack 2 will be reprinted, including the first two blocks that were successfully
stacked and the last two blocks that have not been fed. (The two completed blocks and the remaining
sheets for the last two blocks will be delivered to the uncompleted conveyor.)
5
4
3
2
1
Stack 1
3. Reprinting only the bad block
For example, when running a job with five blocks in a stack, there is a jam in the third block of Stack
2, only the sheets for that block will be reprinted. The sheets for the two completed blocks will be
delivered to the uncompleted conveyor so they can be checked.
5
4
3
2
1
Stack 1
4. Reprinting only the bad sheet
The system will display in the reprint list only the sheet that jammed. To do this, the reprint list must
be edited.
5
4
3
2
1
Stack 1
SmartStacker User's Manual
10
9
8
7
6
Stack 2
10
9
8
7
6
Stack 2
No.1
10
9
8
7
6
4 3
Stack 2
10
9
8
4 3
7
6
Stack 2
➡ See page 131 for details.
5
10
4
9
3
8
2
7
1
6
Stack 1
Stack 2
➡ See page 133 for details.
5
10
4
9
3
8
2
7
1
6
Stack 1
Stack 2
➡ See page 137 for details.
No.2
No.3
5
10
4
9
3
8
2
7
1
6
2 1
Stack 1
Stack 2
➡ See page 140 for details.
No.1
No.2
No.3
5
10
4
3
2 1
2
1
Stack 1
Stack 2
All of the sheets will
to be displayed in
reprint list
All of the sheets in
this stack will be
displayed in reprint
list
Sheets to be reprinted
No.4
No.5
No.4
No.5
9
8
7
6
One sheet will
be displayed in
reprint list
No.6
No.7
No
No.6
No.7
N
127
Advertisement
Table of Contents
