Table of Contents
Advertisement
SmartStacker Screen Descriptions
1-2-41
Information - Administrator - Administrator Setting Screen - Part 1
1
2
3
4
1
Power Saving Mode
This is used to activate or deactivate the automatic
power saving mode.
2
Time To Power Saving (min)
This sets the delay before the machine goes into the
power saving mode.
3
Counter
This is used to set the counting method for the
preset counter.
Count down
Count up
4
Divided Block Delivery
If the stacker becomes full when the blocks are
stacked as they are set on the counter for the
number of block in one stack when the preset
function is turned on, the process can be changed
after the blocks are divided and delivered.
68
When the stacker is full, the feeding
operation is stopped, and the divided
blocks are delivered. Then, the
Confirmation screen is displayed.
(See page 347 for details.)
Attention
When the machine is used in a Near Line system
or an inline system, the machine is operated in the
same way as the divided block delivery function is
selected on. However, the blocks are not divided
when the blocks are stacked straight. When
the preset function is turned off, the machine is
operated in the same way as the divided block
delivery function is selected on.
When the stacker becomes full, the full
stacked blocks are delivered once, the next
blocks are separately delivered.
For example, if "100" has been entered
on the counter for the number of blocks in
one stack, and if the 100th block cannot be
stacked, 99 blocks are delivered first, and
the last one is delivered later.
SmartStacker User's Manual
Advertisement
Table of Contents
