Table of Contents
Advertisement
If an Error Code Is Displayed on FLC
No
Communication error
1110
The new job message was received before
starting the session.
1120
Communication error while creating a job
1130
Failed to load the job.
Communication error
1200
The new sheet message was received before
starting the session.
Communication error
1210
The new sheet message was received while
the line pauses.
Communication error
1220
The sheet delivered message was received
before starting the session.
Communication error
1230
he sheet additional info message was
received before starting the session.
The machine cannot be operated.
1300
Check the status of machine.
The machine cannot be operated.
1310
Check the status of machine.
1320
Failed to load the job.
1330
Failed to load the job.
1340
Failed to load the job.
"Communication error
1400
No response for the end session from the
press."
Connection error on communication with the
2000
machine during the session
Connection error on communication with the
2010
machine while processing the error
Machine error
3000
Recover the machine.
350
Descriptions
System
Line
If this error occurs frequently, call your local
Inline
dealer.
If this error occurs frequently, call your local
Inline
dealer.
If this error occurs frequently, call your local
Both
dealer.
If this error occurs frequently, call your local
Inline
dealer.
If this error occurs frequently, call your local
Inline
dealer.
If this error occurs frequently, call your local
Inline
dealer.
If this error occurs frequently, call your local
Inline
dealer.
The machine cannot be operated.
Near Line
Check the status of machine.
The machine cannot be operated.
Near Line
Check the status of machine.
If this error occurs frequently, call your local
Nearline
dealer.
If this error occurs frequently, call your local
Nearline
dealer.
If this error occurs frequently, call your local
Nearline
dealer.
If this error occurs frequently, call your local
Inline
dealer.
Check that the LAN cable between the FLC
and the SmartStacker (at the back of the
Both
Merge Stacker) is connected correctly. If this
error occurs frequently, call your local dealer.
Check that the LAN cable between the FLC
and the SmartStacker (at the back of the
Both
Merge Stacker) is connected correctly. If this
error occurs frequently, call your local dealer.
Recover the machine. Press the OK button on
Both
the Error screen after correcting the cause of
the problem.
SmartStacker User's Manual
Solutions
Advertisement
Table of Contents
