Adjusting The Stopper On The B2 Stacker - Horizon Fitness SmartStacker User Manual

Adjusting the Guide Positions
5-3-6

Adjusting the Stopper on the B2 Stacker

If the head edge of the stack of sheets is misaligned, or the tail edge is misaligned and the stack is
scratched when the stack is lowered, adjust the stopper position.
Run - Fine Adjustment Screen
Attention
The fine adjustment cannot be done while
the machine is running. Press the Stop but-
ton to stop feeding. Do the fine adjustment
while the job is stopped.
Sheets Stacked in
the B2 Stacker
202
Aligned Misaligned Head Edge
OK
Stopper
NG
Reduce the value for the stopper set-
ting.
If a sheet jams or the tail edge of the
stack is scratched by the stack regis-
ter guide when the stack is lowered -
Increase the value for the stopper
setting.
SmartStacker User's Manual