Table of Contents
Advertisement
Code
Circuit Trouble
(Amplifier Display: ct)
6108
There is a fault in the supply power voltage inside
the servo amplifier. There may be a failure in the
internal circuit.
Memory Error
(Amplifier Display: dE)
6109
The parameter stored in the servo amplifier is
damaged.
Fuse Broken
(Amplifier Display: Fb)
6110
The fuse in the main circuit of the servo amplifier
is blown.
Motor Combination Error
(Amplifier Display: cE)
6111
The combination of the servo amplifier and the
motor is not correct.
Braking Transistor Overheat
(Amplifier Display: tH)
6112
The regeneration handling transistor built in the
servo amplifier is overheated.
Encoder Communication Error
(Amplifier Display: Ec)
6113
Communications with the internal encoder of the
servo motor fails.
CONT (control signal) Error
(Amplifier Display: ctE)
6114
The parameter stored in the servo amplifier is
incorrect.
Overload 1
(Amplifier Display: oL1)
6115
The servo motor is mechanically locked.
Overload 2
(Amplifier Display: oL2)
6116
The servo motor is mechanically locked.
SmartStacker User's Manual
Description and Causes
If an Error Code Is Displayed on SmartStacker
Turn off the power. Wait about 30 minutes and
turn on the power again. If this error occurs
frequently, call your local dealer.
Turn off the power. Wait about 30 minutes and
turn on the power again. If this error occurs
frequently, call your local dealer.
If this error occurs frequently, call your local
dealer.
Solutions
325
Advertisement
Table of Contents
