Table of Contents
Advertisement
3-1-2
Setting the Delivery Action
2
3
1
Decide how many blocks should be delivered before the machine stops.
Example - A partial block is not delivered when the top of the stack is near the upper limit
There is only
space for two
pages below
the upper
limit.
Example - Feeding stops when the preset number of blocks has been fed
Number of blocks
already delivered
0
The machine will deliver full and partial blocks when the top of the stack reaches the upper limit
SmartStacker User's Manual
Setting the Control Panel - When using the Merge Stacker
pieces/hr
There are five pages in
each block, so there is not
enough space for a whole
block. The machine will
not stack part of a block.
Total preset number
of blocks
50
Press this but-
ton to clear the
number of blocks
already delivered.
• The preset counter is not used.
• The machine continues feeding the uncut sheets
until the Stop button is pressed or the sheets run
out.
• Enter the number of pages in each block. When
the top of the stack is close to the upper limit
of the Merge Stacker, and there is not enough
space for a whole block, the machine will not
stack part of a block.
• The machine stops after feeding the number of
blocks which has been set on the preset counter.
• Enter the number of pages in each block. When the
top of the stack is close to the upper limit of the Merge
Stacker, and there is not enough space for a whole
block, the machine will not stack part of a block.
• The preset counter is not used.
• All of the blocks are stacked without offsetting.
When the top of the stack reaches the upper limit
of the Merge Stacker, the blocks are delivered.
The stack may include part of a block.
1
153
Advertisement
Table of Contents
