Horizon Fitness SmartStacker User Manual page 385

If the sheet guides bend
• Remove the sheet guides from the frame. Soak them in hot water. (In the hot water of about 80
degrees Celsius / 176 degrees Fahrenheit, for about one minute)
• If the sheet guides are straightened, attach them on the frame again.
• If the sheet guides are still bent, replace them with new ones.
Remove
Push the projections and move up the sheet
guide.
To remove the lower sheet guide,
move it down.
7
After checking and attaching the sheet guides, return the cutter unit.
8
Tighten two locking screws for cutter unit.
9
Attach the removed trim guides again.
SmartStacker User's Manual
Attach
Pull back the projections and insert the sheet
guide into the slit.
Be careful with the upside and downside of the
guide.
SmartStacker
26030
60105A2
385