1MRK 511 407-UEN C
Section 22
22.1
22.1.1
22.2
22.2.1
Phasor measurement unit RES670 2.2 IEC
Application manual
Basic IED functions
IED identifiers TERMINALID
Application
IED identifiers (TERMINALID) function allows the user to identify the individual
IED in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit
names.
Product information PRODINF
Application
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers:
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers.
•
ProductVer
•
ProductDef
•
FirmwareVer
•
SerialNo
•
OrderingNo
•
ProductionDate
•
IEDProdType
Figure 117:
IED summary
This information is very helpful when interacting with ABB product support (for
example during repair and maintenance).
Section 22
Basic IED functions
IP15060-1 v2
M15324-3 v6
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v9
335