To Make A Call; Speed Calling - System; To Program Speed Calling - System Key (One-Touch Speed Calling Key); To Operate From Speed Calling - System Key - NEC DT750 User Manual

SPEED SET
1:25 PM TUE 18 MAR 2008
MIC

To Make a Call

1. Press (Redial) key. Receive Dial Tone.
key lamp lights red.
Speaker
LNR[ ]/SPD[_ _]
2. Press the desired speed calling number.
3. Lift the handset.
Speaker
>>>
–1
XXXXXX
01
XXXXXX
key lamp goes off.

Speed Calling - System

To Program Speed Calling - System Key
(One-Touch Speed Calling Key)
1. Press Feature
2. Press a desired One-Touch Speed Calling
key. The LCD displays previously stored digits.
3. Dial the Speed Calling – System Access Code
and the abbreviated call code.
4. Press Feature
off.
SPEED SET
1:25 PM

To Operate from Speed Calling - System Key

1. Press the Speed Calling – System key.
1:25 PM
2. If the DT750 does not have the "Speed
Calling – System" key, dial the Speed
Calling – System Access Code, then the
abbreviated call code.
75
key. Feature key lamp lights red.
key again. Feature key lamp goes
TUE 18 MAR 2008
XXXX
TUE 18 MAR 2008