Speed Dial – System/Group/Station; System Bins Limited To 1000 With Speaker Key Or #2 Service Code; Dss Console Chaining; Storing A Flash - NEC UNIVERGE SV9100 Features And Specifications

Speed Dial – System/Group/Station
Description
Speed Dialing gives an extension user quick access to frequently called numbers. This saves time, for
example, when calling a client with whom they deal often. Instead of dialing a long telephone number,
the extension user just dials the Speed Dialing code.
There are three types of Speed Dialing: System, Group and Station. All co-workers can share the
System Speed Dialing numbers. All co-workers in the same Speed Dialing Group can share the Group
Speed Dialing numbers. Station Speed Dialing numbers are available only at a user's own extension.
The system has 10000 Speed Dialing bins that you can allocate between System and Group Speed
Dialing and a maximum of 64 Speed Dialing Groups are available. Each extension has 10 Station Speed
Dial bins.
Each Speed Dialing bin can store a number with up to 24 digits.
When placing an Speed Dialing call, the system normally routes the call through Trunk Group Routing or
ARS (whichever is enabled). Or, the user can preselect a specific trunk for the call. Also, the system can
optionally force System Speed Dialing numbers to route over a specific Trunk Group. User preselection
always overrides the system routing.

System Bins Limited to 1000 with Speaker Key or #2 Service Code

Though there are 10000 Speed Dialing bins available in the system, once programmed, these bins can
currently be dialed only using the Directory Dial feature (Press Directory key + ABB softkey + press
ABBc/ABBg + use arrow keys to locate number or enter the Speed Dial bin name & press arrow key to
locates number + Speaker to place call.)
Speaker and service code #2 operations are not available for any 4-digit Speed Dial System bin number.

DSS Console Chaining

DSS Console chaining allows an extension user with a DSS Console to chain to a Speed Dialing number
stored under a DSS Console key. The stored number dials out (chains) to the initial call. This can, for
example, simplify dialing when calling a company with an Automated Attendant. You can program the
bin for the company number under one DSS Console key (e.g.,
under the other (e.g.,
#
the Automated Attendant to answer, then press the second key to call the client (extension 400). See the
Programming section below for additional details.
The DSS Console user can also chain to an Speed Dialing number dialed manually, from a Programmable
Function Key or a One-Touch Key.

Storing a Flash

To enhance compatibility with connected Centrex and PBX lines, Speed Dialing bin can have a stored
Flash command. For example, storing 9 Flash 926 5400 causes the system to dial 9, flash the line and
then dial 926 5400. The Flash can be stored by the user from their telephone or by the system
administrator during system programming.
Using a Programmable Function Key
201). The DSS Console user can press the first key to call the company, wait for
200) and the client's extension number
#
1105