NEC UNIVERGE SV9100 Features And Specifications page 45

Program
Program Name/Description
Number
14-09-02 Conversation Recording Destination for
Trunks – ACI Automatic Recording for
Incoming Calls
Determine if incoming trunk calls should be
automatically recorded in the ACI.
15-07-01 Programmable Function Keys
If required, program an ACI Conversation
Record Key (code 69 + 0). This key allows an
extension user to press the key to manually
record a call to the ACI.
15-12-01 Conversation Recording Destination for
Extensions – ACI Recording Destination
Extension Number
Assign the ACI Call Recording destination per
extension. The destination can be an ACI port
extension number (assigned in Program 11-06)
or an ACI Department Group pilot number
(assigned in Program 11-08). If destinations are
assigned in Program 14-09 and Program 15-12,
the destination in Program 15-12 is followed.
15-12-02 Conversation Recording Destination for
Extensions – ACI Automatic Recording for
Incoming Calls
Determine whether or not an extension should
be automatically recorded when an incoming
call is received.
33-01-01 ACI Port Type Setup
Set each ACI software port for input (1) or input/
output (2). Use input ports for Music on Hold
sources. Use output ports for External Paging/
ringer control.
33-02-01 ACI Department Calling Group
Assign ACI software ports to ACI Department
Groups. This lets ACI callers connect to ACI
software ports by dialing the group pilot number
(set in Program 11-08).
Input Data
0 = Off
1 = On
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Extension Number = Maximum
eight digits
0 = Off
1 = On
ACI Ports: 1 ~ 96
ACI Types:
0 = None
1 = MOH/BGM (Input)
2 = External Audio Port
(Input/Output)
ACI Ports: 1 ~ 96
ACI Groups: 1 ~ 16
45
Default
0
No Setting
0
2
ACI Port/Group/
Priority
01/ 1/ 1
02/ 1/ 2
: / :/ :
96/ 1/ 96