NEC UNIVERGE SV9100 Features And Specifications page 21

Guide to Feature Programming
Program
Program Name/Description
Number
Basic Trunk Data Setup – Account Code
14-01-11
Required
Enable/Disable Account Codes for each trunk.
15-07-01 Programmable Function Keys
Assign a function key as an Account Code key
(code 50). Use this key instead of the dial pad
to enter the * before and after the Account
Code.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
20-13-20 Class of Service Options (Supplementary
Service) – Account Code/Toll Restriction
Operator Alert (Restricted Operation
Transfer)
Turn Off or On the Operator Alert when a forced
account code is incorrectly entered.
System Options for Outgoing Calls – Forced
21-01-14
Account Code Inter-digit Timer
The system waits this time for a user to enter a
Forced Account code.
21-04-01 Toll Restriction Class for Extensions
Assign a Toll Restriction Class (1 ~ 15) to an
extension.
Account Code Setup – Account Code Mode
35-05-01
For each Class of Service (1 ~ 15) select the
Account Code Mode.
Input Data
0= Disable (No)
1= Enable (Yes)
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 ~ 64800 seconds
Day/Night Mode
1 ~ 9 (9 = Power Failure Mode)
Restriction Class 1 ~ 15
0 = Account Codes disabled
(None)
1 = Account Codes optional
2 = Account Codes required but
not verified (No verify)
3 = Account Codes required and
verified (Verify)
21
Default
1
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 0
3
2
0