Setting Control Functions; Setting The Gpib; Setting Talker/Listener Gpib Address Of E4990A; Setting System Controller (Usb/Gpib Interface) - Keysight E4990A Help Manual

Setting Control Functions

Setting Control Functions
Remote Control

Setting the GPIB


Remote Control Using HTTP (Web Browser)

Display
Turning off the Date/Time Display

Turning off the LCD Screen Backlight

Calibration of the Touch Screen

Others
Exit/Restart E4990A Measurement Application

Checking the Product Information

Backing Up License Key File

Locking the Front Keys, Keyboard, and/or Mouse (Touch Screen)

Setting the Beeper (Built-in Speaker)

Setting the preset function

Setting the GPIB

Setting talker/listener GPIB address of E4990A

•

Setting system controller (USB/GPIB interface)

•
Other topics about Setting Control Functions
This section describes how to set the interface necessary to use the GPIB
(General Purpose Interface Bus) of the E4990A.
Setting talker/listener GPIB address of E4990A
When controlling the E4990A using GPIB commands from the external
controller connected to the GPIB connector, you need to set the
talker/listener GPIB address of the E4990A.
Follow these steps to make this setting:
1. Press
System
2. Enter the address using the ENTRY block keys on the front panel.
Setting system controller (USB/GPIB interface)
> Misc Setup > GPIB Setup> Talker/Listener Address.
197