Table of Contents
Advertisement
Configuring the Avaya XT Telepresence
b. Enter the license keys you received from the PLDS, to either activate the product or
activate the optional features you purchased.
c. Select Enable License on the web interface, or Activate Licenses on the endpoint
itself.
The system automatically enables the license.
Important:
If you are enabling a second network port or Avaya Collaboration Control with a
license, the XT Codec Unit restarts.
Related links
Configuring the Avaya XT Telepresence
Configuring Basic Settings with the Quick Setup Wizard
About this task
This method corresponds to the third option for the installation and configuration of your XT
Series. When you choose the Manual Setup option, you can define basic settings with the quick
setup wizard, such as the system's name, language, and network settings. This is relevant for
both new installations, or after restoring default settings. You can only calibrate the image on the
endpoint itself using its monitor, not from the web interface.
Some settings may already be customized for your organization. If required, ask the system
administrator for the device's password.
You need to configure all three XT Series systems separately, performing procedures described in
this section three times: once on each of the XT Codec Units.
August 2020
on page 36
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Figure 39: Licenses
50
Advertisement
Table of Contents
