Configuring Basic Settings With The Quick Setup Wizard - Avaya Scopia XT Telepresence Deployment Manual

Configuring Basic Settings with the Quick Setup Wizard

About this task
To start using your Avaya Scopia
such as the system's name, language, and network settings. This is relevant for both new
installations, or after restoring default settings. You can only calibrate the image on the endpoint
itself using its monitor, not from the web interface.
Some settings may already be customized for your organization. If required, ask the system
administrator for the device's password.
You need to configure all three XT Series systems separately, performing procedures described in
this section three times: once on each of the XT Codec Units.
The quick setup wizard automatically appears the first time you access the XT Series, either by
turning it on or logging in to the web interface. Alternatively select Configure > Quick Setup from
the Main Menu.
The quick setup wizard guides you through many of the following basic configuration tasks:
Related links
Configuring the XT Telepresence
Accessing XT Series Web Interface
Setting the System Name, Language, and Call Method
Adjusting the Image Position
Configuring Basic Network Settings
Configuring Basic Gatekeeper Settings
Configuring Basic SIP Settings
Setting Date and Time
Configuring Advanced Regional Audio and Video Settings
Setting the Time Zone
Configuring the Screen Saver to Start Automatically
January 2017
®
XT Series, first define basic settings with the quick setup wizard,
Figure 44: Accessing the Quick Setup
on page 34
on page 42
on page 55
on page 56
on page 57
on page 58
on page 60
on page 62
®
Avaya Scopia XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic Settings with the Quick Setup Wizard
on page 53
on page 60
on page 63
51