Configuring Basic Settings With The Quick Setup Wizard - Avaya XT Series Deployment Manual

Manually setting up the XT Series
b. Enter the license keys you received from the PLDS, to either activate the product or
activate the optional features you purchased.
c. Select Enable License on the web interface, or Activate Licenses on the endpoint
itself.
The system automatically enables the license.
Important:
If you are enabling a second network port or Avaya Collaboration Control with a
license, the XT Codec Unit restarts.
Related links
Manually setting up the XT Series

Configuring Basic Settings with the Quick Setup Wizard

About this task
This method corresponds to the third option for the installation and configuration of your XT
Series. When you choose the Manual Setup option, you can define basic settings with the quick
setup wizard, such as the system's name, language, and network settings. This is relevant for
both new installations, or after restoring default settings. You can only calibrate the image on the
endpoint itself using its monitor, not from the web interface.
Some settings may already be customized for your organization. If required, ask the system
administrator for the device's password.
To access the manual setup at any time, select Configure > Quick Setup from the Main Menu.
You can relaunch the wizard at any time to refresh your configuration settings.
August 2020
Figure 48: Licenses
on page 105
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
110