Pairing An Xt Remote Control Unit - Avaya Scopia XT Series User Manual

Pairing an XT Remote Control Unit

About this task
If you have multiple XT Series units in the same room, you can pair a XT Remote Control Unit with its XT
Codec Unit so that every unit has its dedicated remote, so when you press a key on a remote, it triggers
an action on the correct XT Series unit. Enter the same numeric code in both the XT Series and its XT
Remote Control Unit to pair them. By default all remotes and endpoints use the same code 01.
Procedure
1. Access the general settings. From the XT Series web interface, select Basic Settings >
2. Enter a two-digit numeric code between 01 and 99 in the Remote Control Code field.
3. From the web interface only, select Save.
4. On the XT Remote Control Unit, press the * and # keys simultaneously until its red light blinks
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
General. From the endpoint's main menu, select Configure > General.
You can use the XT Remote Control Unit's initial default pairing to perform this task.
Figure 7: Setting the XT Remote Control Unit Code
twice.
Getting Started | 13