Pairing The Remote Control Unit With Avaya Ix; Logging In To The Avaya Ix - Avaya IX Collaboration Unit CU360 Installing And Administering

Pairing the remote control unit with Avaya IX

Before you begin
Insert two AAA batteries in the remote control unit.
Procedure
1. Remove the power cable of Avaya IX
2. On the remote control unit, simultaneously press the following two keys until the small blue
LED indicator on Avaya IX
• Back
• OK
3. When the LED indicator is flashing, insert the power cable plug of Avaya IX
power socket.
Ensure that the remote control unit is in proximity to Avaya IX
power cable.
Result
The LED indicator of the remote control unit stops flashing to indicate successful pairing with
™
Avaya IX CU360.
Next steps
If the remote control unit pairing fails, remove all cables from Avaya IX
procedure.
Related links
Avaya IX CU360 remote control unit

Logging in to the Avaya IX

About this task
The home page of Avaya IX
Change the default login credentials when you log in to the web interface for the first time.
Procedure
1. In a web browser, navigate to the IP adress of Avaya IX
™
Avaya IX
2. Enter the following:
• User Name: The default user name is Admin.
• Password: The default password is 1234.
April 2020
™
CU360 flashes:
on page 13
™
CU360 displays the IP address of the endpoint on the top.
CU360 displays the login page.
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Pairing the remote control unit with Avaya IX
™
CU360.
™
CU360 web interface
™
™
CU360
™
CU360 in the
™
CU360 when you insert the
™
CU360, and repeat the
CU360.
™
CU360
27