Cameras General Field Descriptions; Configuring The Avaya Ix - Avaya IX Collaboration Unit CU360 Installing And Administering

Cameras General field descriptions

Name
Default Camera
Camera Control by Far Site
Bring Back to Place

Configuring the Avaya IX

About this task
Configure the settings of each camera that you connect to the HD1 port of Avaya IX
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
IX CU360 displays the Advanced window.
3. Click I/O Connections > Cameras > HD1.
4. Select Yes for Enable the camera.
You cannot disable Default Camera.
5. Configure the following fields:
• Control Camera
• Tracking
• White Balance Mode
April 2020
Description
™
Avaya IX CU360 connects the default camera through HD 1 or USB
port.
To configure the Default Camera, the options are:
• HD 1: The built-in camera.
• USB: Select if you connect the Avaya video grabber to the USB port.
The option to control the Avaya IX
endpoint.
™
Avaya IX CU360 stores the camera positions when the camera is turned
off and restores this position when the camera is turned on.
™
CU360 HD1 port
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Cameras General field descriptions
™
CU360 camera from remote
™
CU360.
79