Configuring Cameras - Avaya Scopia XT7100 Deployment Manual

Initial Configuration of the XT Series
Field Name
PIP - Position
PIP - Rotation
7. From the web interface only, select Save.
Related Links
Initial Configuration of the XT Series

Configuring Cameras

About this task
Configure the camera depending on the type of camera, its functionality, and how it is connected to
the XT Series. For more information about connecting your camera to the XT Codec Unit, see
Connecting Cameras or DVD players
In this section, first define which camera is the unit's default camera and other general properties,
then define each camera's settings by configuring the port connection.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Connect the video equipment, as described in
Procedure
1. Access the camera settings. From the XT Series web interface, select Administrator
settings > I/O connections > Cameras > General. From the endpoint's main menu, select
Configure > Advanced > I/O connections > Cameras > General.
®
Avaya Scopia XT Series Deployment Guide
100
Description
• PaP enables only PaP.
• PoP enables only PoP.
Set the position of the small overlapped image on the monitor: upper left, upper right,
lower left, or lower right.
Enables/disables image rotation and controls the direction in which the image rotates.
End-users press the Layouts
• Fixed blocks image rotation (not available for Scopia
• Clockwise rotates the overlapped image clockwise.
• Counterclockwise rotates the overlapped image anti-clockwise.
on page 78
on page 48.
Comments? infodev@avaya.com
key to activate image rotation (if enabled).
on page 112.
Connecting Cameras or DVD players
®
XT Executive).
on page 48.
April 2015