Cameras General Field Descriptions; Configuring The Avaya Cu360 Hd1 Port - Avaya CU360 Installing And Administering

3. Click I/O Connections > Cameras > General.
4. Configure the following fields:
• Default Camera
• Camera Control by Far Site
• Bring Back to Place
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings
Avaya CU360 camera and LED indicators

Cameras General field descriptions

Name
Default Camera
Camera Control by Far Site
Bring Back to Place

Configuring the Avaya CU360 HD1 port

About this task
Configure the settings of each camera that you connect to the HD1 port of Avaya CU360.
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
July 2020
on page 40
on page 16
Description
Avaya CU360 connects the default camera through HD 1 or USB port.
To configure the Default Camera, the options are:
• HD 1: The built-in camera.
• USB: Select if you connect the Avaya video grabber to the USB port.
The option to control the Avaya CU360 camera from remote endpoint.
Avaya CU360 stores the camera positions when the camera is turned off
and restores this position when the camera is turned on.
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Cameras General field descriptions
87