Configuring Cameras - Avaya XT Series Deployment Manual

Manually setting up the XT Series

Configuring Cameras

About this task
Configure the camera depending on the type of camera, its functionality, and how it is connected
to the XT Series. For more information about connecting your camera to the XT Codec Unit, see
Connecting Cameras or DVD players
In this section, first define which camera is the unit's default camera and other general properties,
then define each camera's settings by configuring the port connection.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Connect the video equipment, as described in
Procedure
1. Access the camera settings. From the XT Series web interface, select Administrator
settings > I/O connections > Cameras > General. From the endpoint's main menu,
select Configure > Advanced > I/O connections > Cameras > General.
2. Configure the camera connection as described in
settings on page 127:
August 2020
on page 59.
on page 151.
Connecting Cameras or DVD players
Figure 57: Cameras
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Table 22: Configuring general camera
on page 59.
126