Configuring A Second Display - Avaya 1050 Installation Manual

Configuring a Second Display

If you installed a second display, you must configure it. Navigate to Administrator
Preferences : Appearance : Layout and choose Display 2 Layout, which, by default is set
to None.
• Choose Presentations + DVI-I Input to display presentations (local and remote) during a
call that is sending or receiving a presentation. When not in a call, DVI-I input appears in
the display.
• Choose Calls + Presentations + DVI-I Input to display:
- video images from video calls
- presentations (local and remote) in a call that is sending or receiving a presentation
- DVI-I input when not in a call
• Choose Simulcast Calls + DVI-I Input to show the same output on Display 2 as shown
on Display 1 during calls.
If you use a VGA projector as Display 2, navigate to Administrator Preferences :
Appearance : Displays and choose Display 2 Resolution. Configure its resolution to 1280
x 768 to match the default HD configuration of Display 1.
Note: To use the Calls + Presentations + DVI-I Input or Simulcast Calls + DVI-I Input
options, you must set Display 1 and Display 2 to the same resolution. Otherwise,
you will see a warning message and this option with be forced to Presentations +
DVI-I Input.
19 Avaya 1050 Installation Guide