Chapter 4 Starting Up The Switch At The Initial Boot; Setting Up A Configuration Environment; Connecting The Console Cable; Setting Terminal Parameters - Huawei Quidway S3900 Series Installation Manual

Installation Manual
Quidway S3900 Series Ethernet Switches

Chapter 4 Starting up the Switch at the Initial Boot

4.1 Setting up a Configuration Environment

Set up a configuration environment as shown in Figure 4-1.
Connect a terminal, a PC in this scenario to the Console port on the switch with a
console cable.
PC PC

Figure 4-1 Network diagram for configuring the switch at initial boot

4.2 Connecting the Console Cable

Step 1: Connect the DB-9 female connector of the console cable to the serial port on
the PC that is used for configuring the switch.
Step 2: Connect the RJ-45 connector of the console cable to the Console port on the
switch.

4.3 Setting Terminal Parameters

Follow these steps to set terminal parameters on the PC (running Windows98 for
example):
Step
[Start/Programs/Accessories/Communications/HyperTerminal].
The HyperTerminal window displays the Connection Description dialog box, as shown
in Figure 4-2.
Console port Console port
Serial port Serial port
Console cable Console cable
1: Start
Huawei Technologies Proprietary
4-1
Chapter 4 Starting up the Switch at the Initial Boot
Switch Switch
the PC and select